August 8th, 2016 by Chief


we would like to share with you some knowledge and experience about home microcontroller playground.
Arduino microcontrollers will be in focus.

First off all , lets start with asking ourselves , what is microcontroller and why do we need it ? Someone would even ask does it have anything to do with Microsoft? 🙂 (Just kidding 🙂 )

So here is a basic and simplified definition from Wikipedia:

A microcontroller (or MCU, short for micro controller unit) is a small computer (SoC) on a single integrated circuit containing a processor core, memory, and programmable input/output peripherals. Program memory  is also often included on chip, as well as a typically small amount of RAM. Microcontrollers are designed for embedded applications, in contrast to the microprocessors used in personal computers or other general purpose applications consisting of various discrete chips.

So, let`s take a look at few most common used MCU boards:

First we will speak a little bit about  Arduino Nano:


Arduino Nano

It`s dimensions are around 4.5 x 1.6 cm 1.8″ x 0.62″  and power consumption at 7 V is 20 mA , so small measures make it perfect for small consumption sensitive applications (Weather station that runs on batteries or solar power or something like that) and price of cca 2.5 $ makes it great choice for a small hobby projects.



Name Processor Operating/Input
CPU Speed Analog In/Out Digital IO/PWM EEPROM [kB] SRAM [kB] Flash [kB] USB UART
Nano ATmega168
5 V / 7-9 V 16 MHz 8/0 14/6 0.512
Mini 1


Now let us explain some of this stuff:



This means that this board is in manufacturing process with two processor types, and depending on that there may be more variations between those two boards (clock speed, amount of memory etc.) If any of this may be important to you watch out what version of board do you buy , since there can be a price difference to.


5 V / 7-9 V

It means that microcontroller works on 5 V  (when you connect board to your computer usb port it will get power also and start working) and when you supply it with external power it should be 7-9 V.

This is because this board has its own voltage regulator and it needs some voltage difference to let`s say make it work like it should or to stabilize voltage at 5 V.This is also its logic level.
(Remember that with these boards we always talk about DC current).

Analog In/Out


Number of analog Inputs and Outputs, it is number of pins that you can connect analog signal to.In this case it means 8 analog inputs and 0 outputs. Why do we need that some may ask?

Let us try to make it as simple as possible, microprocessor works with digital signals, it is it`s advantage , and now we want to process some analog signals , how is that possible?

Well MCU has some analog to digital converters built in , sometimes referred to us as ADC, and what they do is convert an analog signal or voltage on a pin to a digital value or a number. By converting from the analog  to the digital , we can begin to process analog information’s in our programing and later make some decisions or actions based on these same info.

Main parameter of ADC is it`s resolution and it is measured in bits. Generally Arduino ADC is 10 bit , and it means that it can detect 1024 different analog levels it is (210) More bits means better resolution.So if a ADC is 5 V logic level, it means that 5 V on input pin would equal 1023 read value.
Or put it in formula Resolution of ADC\system voltage = ADC reading \ analog voltage measured.
Logical goal at this moment would be to find ADC reading, and that would be 1023\5 *analog voltage measured. For example if we have 3.4 volts on analog input , digital read would be 1023\5*3.66  and that is 750 . So now you know in this particular case that voltage of 3.66 volts equals 750 digital read signal. So…. what would we need that information? Imagine that you wand to monitor status of a battery, and if it gets to low you want charging to be activated. lets say that this voltage trigger is 3.6 V  or as we calculated  750. Now lets make a statement that something called x is 750. To put it in most simple words you would write in your microcontroller program something like this: if x<750 turn on relay 1 . (Let`s imagine that relay1 activates battery charger) .This is just simplified explanation not a coding language, but it is not much more different than that.

Now, someone would ask , but what if we want to measure car battery voltage, that should be around 12 V , and in last example we can notice that biggest measuring voltage can be 5 V .Well that would be great observation , but there is a play around it :). It is called voltage divider but we will come to it latter.

Digital IO/PWM

14/6 in this case it means that this board has 14 digital inputs or outputs , of which 6 can be PWM outputs. Huh what are you talking about here? Are they inputs or outputs?  And what is that PWM???

Ok, lets start one by one….

If it says 16 digital Inputs / outputs it means that every of those pins can be either input or output , digital of course. So how do you make it one or the other way? Lets, presume that we want to connect LED to pin digital 3 on Arduino and to turn it on from time to time , or to make it blink. Simple conclusion is that current will flow from Arduino to LED so Arduino pin is output.

In coding language it would be like this:

int ledPin = 3;

pinMode(ledPin, OUTPUT)

So what we did, first of all we said that something that we will call ledPin is on digital pin 3 of Arduino board, and that we said that it is going to be output. Quite cool , isn`t it?
We could call it John`sPin or Laker`sPin , or KlingonPin , but we would like to know what is it for , so we should have some naming convention established, but this is enough for now, since we still do not know what is that PWM and what is it for?

Here we will not reinvent the wheel , but here is just a definition from (your favorite site from now on 🙂 ) :

“Pulse Width Modulation, or PWM, is a technique for getting analog results with digital means. Digital control is used to create a square wave, a signal switched between on and off. This on-off pattern can simulate voltages in between full on (5 Volts) and off (0 Volts) by changing the portion of the time the signal spends on versus the time that the signal spends off. The duration of “on time” is called the pulse width. To get varying analog values, you change, or modulate, that pulse width. If you repeat this on-off pattern fast enough with an LED for example, the result is as if the signal is a steady voltage between 0 and 5v controlling the brightness of the LED.”



This is example of how PWM signal would look like on Oscilloscope .
But why is it so important , if we would only like to control the brightness of LED i could use a resistors , or a trimmer , it is more simple…..  well maybe but what if i would like to control a big DC motor? Answer is PWM is your  type of signal :). The example of using PWM for controlling speed and power of DC motor is cordless drill. There you have one small PWM regulator, and more you pres that start button below your finger more speed and power your drill delivers, and if you would put oscilloscope on motor terminals you would see signal like on picture above , going from top when drill is off to bottom as button is fully pressed.




The microcontroller has EEPROM (Electrically Erasable Programmable Read-Only Memory) and it is a memory whose values are kept when the board is turned off (like a tiny hard drive).
For now let`s say that this is not something that would consider you on everyday basis, but if you want to know more about subject, Mr. John Boxall has greatly explained it here:




Hm…. you did not read carefully didn`t you? 🙂 Why 1 , and 2 kB ? Of course ,  two versions of board , two different microcontrollers , and different amount of memory. If you expect to have a memory problems, watch over it (of course who would expect memory problems at the beginning of a project 🙂 ). To put it simple bigger the number = better for you.
What is it for?
SRAM (static random access memory) is where the sketch creates and manipulates variables when it runs.Again , bigger the sketch = more memory to keep it running .

Intruder alert: .. what is sketch?

Sketch is basically Arduino program. It is a peace of code that is uploaded to , and run on Arduino board.
These days it has a .ino extension, and is produced by Arduino IDE.

Lets continue, next is Flash memory:


Again two different boards issue….

Flash memory (program space), is memory space where the Arduino sketch is stored.
More memory = better for you = bigger sketch can be stored.



Type of USB connector on board.



The native serial support happens via a piece of hardware (built into the chip) called a UART (Universal asynchronous receiver/transmitter).
This hardware allows the Atmega chip to receive serial communication even while working on other tasks.
So basically it is a hardware serial port.This particular board has only one , and you may want to keep those two pins free, or you may end up with problem uploading sketch to a board or using serial monitor.There is also software serial, and for some applications it can be used, but generally baud rate should be kept low (9600) or errors may appear. 

So this concludes explaining some basic terms, facts, and features of microcontroller board. Let us now continue with introducing few of our favorite MCU`s

Next is our well known maybe the most common board Arduino UNO


Arduino Uno

It`s dimensions are around 7 x 5.5 cm or 2.7″ x 2.2″ and power consumption at 7 V is 20 mA 50 mA @ 7V and it`s price is about 4 $. We often say around since there are many different versions of the same board and this information is just for you to get the idea of sizes. This board is most common beginners choice, great for many projects, very well documented, many examples, many Shields .

Did we just say Shields? What is the shield? Do we need some kind of protection from this MCU stuff? 🙂

Again, not to reinvent the hot water here is official Arduino definition: “Shields are boards that can be plugged on top of the Arduino PCB extending its capabilities. The different shields follow the same philosophy as the original toolkit: they are easy to mount, and cheap to produce”. If you are interested, a complete list of both official and unofficial shields can be found here:

Ethernet shield

Uno with Ethernet shield

Here is a picture of Arduino Uno with Ethernet shield plugged on top. Ethernet shield as it would sound logical gives networking capabilities to Arduino. For example you could run web server on your arduino, and post some data on it, or even make it so that you can turn on / off some relays thru web page, or transmit some sensor readings to services like thingspeak, or .
Not to wander of again , here are specs of UNO:


Name Processor Operating/Input
CPU Speed Analog In/Out Digital IO/PWM EEPROM [kB] SRAM [kB] Flash [kB] USB UART
Uno ATmega328P 5 V / 7-12 V 16 MHz 6/0 14/6 1 2 32 Regular  1


Now it`s time to move on and next on our list is Arduino DUE


Arduino Due

It`s dimensions are around 10.2 x 5.5 cm or 4″ x 2.1″ . Power consumption when running code  is still unknown but will be tested and published soon. Price of cca 15 $ makes it a little more expensive, but hey it is one of the most powerful Arduinos in these days, so maybe it`s worth considering it as choice for your next project.

There is one more very important thing to consider about DUE: It`s logic level is 3.3 V so take care, if it`s gonna “talk” with some other devices , make sure that they are also at 3.3 Volts ll or you may end up with burned or at least damaged Arduino. Same goes for sensors, shields etc. . On the other hand you can mitigate that problem by using logic level converters, but that is other story, for now let`s try to keep things as simple as possible.

But wait, did we few sentences before, just mention sensors ? What about sensors? What kind of sensors? Well that is the beauty , all kind of sensors are there for MCU`s and especially Arduino….
Let`s first observe DUE`s specs, and then we will return to the sensor story.


Name Processor Operating/Input
CPU Speed Analog In/Out Digital IO/PWM EEPROM [kB] SRAM [kB] Flash [kB] USB UART
Due ATSAM3X8E 3.3 V / 7-12 V 84 MHz 12/2 54/12 96 512 2 Micro 4


If we compare it to Uno we see dramatic increase in everything , CPU speed , nobler of both analog and digital inputs, some analog outputs, more ram and flash , more UART`s , and of course it is not 5 but 3.3 volts logic level. This particular board is real small little IOPS (inputs-outputs) monster. It can interconnect with whole bunch of sensors, relays, and other things , and it has a juice to process them. Great board for almost any kind of project, but keep in mind that it is 3.3 V operating voltage.

Now back to sensors , lets make it a little more imaginable, what sensors are , and what they do….

A sensor is a device that detects and responds to some type of input from the physical environment. The specific input could be light, heat, motion, moisture, pressure, voltage, current, sound, weight,  or any one of a great number of other environmental phenomena. Some sensors are only able to detect change, but some are able to even measure that change very precise.
Here are pictures and descriptions of some of our favorite sensors:

MQ-2 sensor:




This sensor is able to detect flammable and combustible gasses like Methane, Butane, LPG and smoke.May be great for home fire/gas warning/alarm system.
Price is about 1.5 $.

MQ-7 sensor:



This sensor is able to detect  Carbon Monoxide, so in combination with MQ-2 you get a great early warning gas detection system.
One more thing to address here, there is a common myth that Carbon Monoxide is heavier than air. Whoever says that is wrong! CO has a molar mass of 28.0, and air has an average molar mass of 28.8 , so it is in fact a little easier. It can be assumed that weight of air and CO is the same , and since CO is usually produced from incomplete combustion (heat source), it can be also assumed that CO will move in direction of hotter air, and warm air is more buoyant than cold air so it rises. Following this logic and fact that CO is lighter than air i would personally put my CO detector on higher place or at the ceiling near the heat source. One more thing CO is  odorless, colorless and tasteless, so without detector it is impossible to notice , that is why it is called “silent killer” and that nickname is well earned. So , MCU`s can even save your life sometimes……
Price of MQ-7 is about 1.6 $.

Back to sensors….

Dallas DS18B20 temperature sensor:




DS18B20 waterproof

It measures temperature in 9-12 bit values (0.5 deg precision) in range of -55°C to +125 Celsius degrees (-67 °F to 257°F)

It comes in two forms, or packages: TO-92 casing (not waterproof , good for measuring air temperature) on left picture, and Etanche or Waterproof casing , on the right picture.
These sensors are easy to use , connect and read. Multiple sensors can be connected on same input, since they each have hardware address burned in.If you are gonna use few sensors, like 2 or 3 and have enough inputs free on your MCU, use separate input pin for every dallas sensor , it is easier, since you do not have to read hardware addresses of sensors, and then target them to read data. Waterproof version is great for measuring temperature of liquids, and other thing and places where to-92 would be impractical or on the harms way.It can be connected to MCU with 2 or 3 wires, both ways work well, and less wires means more simple and practical, so take your pick.
Price of DS18B20 is less than 1 $ for TO-92 version , and about 4 $ for waterproof version.

DHT11 Temperature and humidity sensor:



It is something like combination of DS18B20 and humidity sensor. Humidity measurement range: 20% – 95%, temperature measurement range 0 degrees-50 °C . Humidity measurement error: +-5% ,
temperature measurement error: +-2 degrees. Great for hobby weather station projects. It`s successor is DHT22 better range and more precise.
Price of DHT11 these days is about 1 $.

Soil Humidity Hygrometer sensor:

soil hygrometer

Soil Humidity Hygrometer sensor

Name of this sensor says enough. Why would we use it? Well, with this sensor stuck in ground, MCU could “know” was or is there a rain, and how dry or wet is soil, and based of that turn on or off irrigation system.
Price of this sensor is below 1 $.

Infrared PIR Motion sensor:

pir motion sensor

PIR Motion

Motion detection sensor, great add for home made alarm system.

Price of this sensor is around 1 $.

Ultrasonic Module  sensor :



This sensor can measure distance in range of 2 – 500 cm by precision of 3 millimeters.Great add on for diy robots or smart cars.
Price of this sensor is around 1.2 $.

Single Phase Voltage sensor :

voltage sensor

Single Phase Voltage

Monitor your mains voltage, for example you can make MCU to send a signal for generator to start if voltage goes below or above nominal value.
Price of this sensor is around 5 $.

microphone sensor


Microphone sensor
This sensor can identify the presence or absence of sound, based of that your MCU can make some actions, for example if there is a sound detected, turn on light.
Price of this sensor is around 1 $.

Light sensor :

Light sensor


This sensor can detect light intensity. Based of this information your MCU can activate something else, for example if it is a daytime do not turn on watering system.
Price of this sensor is around 1 $.

Vibration switch  sensor :

vibration sensor

Vibration switch

This sensor is used to trigger at the effect of various vibration, theft alarm, intelligent car, earthquake alarm, motorcycle alarm, etc.

Price of this sensor is around 1 $.

So, to conclude the story of sensors we can made next conclusions:


  1. There are many many different types of sensors (light, sound, distance, voltage, motion, vibration, gas, temperature, moisture and many, many more).
  2. Sensors are quite inexpensive .
  3. Combination of different sensors can give your MCU interesting possibilities , and decision making information.

So sensors are great, and they can make our MCU playground even bigger and more interesting and productive.


It`s time again to move on and next on our list is Arduino MEGA 


Arduino MEGA

This is maybe most common used and best money\features ratio Arduino board.


It`s dimensions are same as DUE board or around 10.2 x 5.5 cm or 4″ x 2.1″. Power consumption when running code  is still unknown but will be tested and published soon.
With price about 8$ whole bunch of In`s and out`s and descent memory and clock speed it is great for many applications and there is even an open source 3D printer driven by MEGA.
If we compare it to DUE , it has almost same number of ports, slower processor and less memory, but it is a 5V board, so if you are gonna deal with 5V signals , chose this one.There are also different versions of this board, so less money does not necessary mean that you got a better deal. This is applied for all MCU boards, since there is big difference in quality from components used to soldering. There is also whole mess about different markings, but for the most part it is marketing trick. You have Arduino Mega ADK (stand for Android development kit) , then you have Arduino Mega 2560 but for the most part those are the same boards.


Name Processor Operating/Input
CPU Speed Analog In/Out Digital IO/PWM EEPROM [kB] SRAM [kB] Flash [kB] USB UART
Mega 2560


Mega ADK

ATmega2560 5 V / 7-12 V 16 MHz 16/0 54/15 4 8 256 Regular 4

Now let`s observe some non Arduino boards….

ESP8266 :


ESP 8266 v1

esp8266 2

ESP 8266 v7

Two different versions, version 01 on the left and version 07 on the right.

The ESP8266 is a low-cost Wi-Fi chip with full TCP/IP stack and microcontroller capability produced by Shanghai-based Chinese manufacturer, Espressif.
But what makes it so interesting? It has a Wi-Fi , but is also a microcontroller. So what? So you can use it in different ways, for example it can work as Wi-Fi interface for other MCU (like Arduino). In this case it will transmit some data that other MCU gives it, over serial connection thru Wi-Fi to LAN or to Internet. It can also host a web server and present data to it.But i think that that was not in mind of designers od 8266. It is quite equipped to work as standalone MCU.
Here is manufactures general specs:

  • 802.11 b/g/n
  • Serial/UART baud rate: 115200 bps
  • Integrated TCP/IP protocol stack
  • Input power: 3.3V
  • I/O voltage tolerance: 3.6V Max
  • Regular operation current draw: ~70mA
  • Peak operating current draw: ~300mA
  • Power down leakage current: <10µA
  • +19.5dBm output in 802.11b mode
  • Flash Memory Size: 1MB (8Mbit)
  • WiFi security modes: WPA, WPA2
  • Module’s dimensions: 24.75mm x 14.5mm (0.974″ x 0.571″)
  • CPU clock is 80 MHz
  • Number of GPIO`s depends of a board version

Yes we just said GPIO, so lets explain it:

General-purpose input/output (GPIO) is a generic pin on an integrated circuit whose behavior—including whether it is an input or output pin—is controllable by the user at run time. GPIO pins have no predefined purpose, and go unused by default. It is something like Arduino in`s and out`s. This little piece made entire revolution on IoT playground, and we will not even try to go deep in to a story about ESP8266 since there is so much blog posts, guides, instructables , even whole blogs dedicated to it.
Thing is if you are gonna start playing with ESP , than you will soon learn what the hell is 🙂 . Why?

esp versions2

Bunch of ESPs

And even not all of them are here 🙂

But that is not all, you have also a different command processors, for them. In original version they come with AT cp (those of you that remember dial-up times will know AT commands ), but there are also NodeMCU some others. We will soon write more details about ESP, to get you started….

Word of author:

Well, it is time to end this story, I hope you find it useful, interesting, and if you have any comments, thoughts, or simply want me to test something , please leave a comment and we will get in touch.
Once again thank you for reading.


Posted in Micro controllers Tagged with: , , , , , , , ,